De 10 mest anvendte Nginx-kommandoer, som enhver Linux-bruger skal vide
Nginx (udtalt Engine x) er en gratis, open source, højtydende, skalerbar, pålidelig, fuldt udstyret og populær HTTP og reverse proxyserver, en mail-proxyserver og en generisk TCP/UDP-proxyserver.
Nginx er kendt for sin enkle konfiguration og lave ressourceforbrug på grund af sin høje ydeevne. Det bruges til at drive flere websteder med høj trafik på nettet, såsom GitHub, SoundCloud, Dropbox, Netflix, WordPress og mange andre.
I denne vejledning forklarer vi nogle af de mest anvendte Nginx-servicestyringskommandoer, som du som udvikler eller systemadministrator skal holde lige ved hånden. Vi viser kommandoer til både Systemd og SysVinit.
Alle disse følgende liste over Nginx populære kommandoer skal udføres som en root- eller sudo-bruger og skal fungere på enhver moderne Linux-distribution som CentOS, RHEL, Debian, Ubuntu og Fedora.
Installer Nginx Server
For at installere Nginx webserver skal du bruge din standard distributionspakkehåndtering som vist.
$ sudo yum install epel-release && yum install nginx [On CentOS/RHEL] $ sudo dnf install nginx [On Debian/Ubuntu] $ sudo apt install nginx [On Fedora]
Tjek Nginx-version
For at kontrollere den version af Nginx-webserveren, der er installeret på dit Linux-system, skal du køre følgende kommando.
$ nginx -v nginx version: nginx/1.12.2
Ovenstående kommando viser simpelthen versionsnummeret. Hvis du vil se version og konfigurere indstillinger, skal du bruge flagget -V
som vist.
$ nginx -V
nginx version: nginx/1.12.2 built by gcc 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) built with OpenSSL 1.0.2k-fips 26 Jan 2017 TLS SNI support enabled configure arguments: --prefix=/usr/share/nginx --sbin-path=/usr/sbin/nginx --modules-path=/usr/lib64/nginx/modules --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --http-client-body-temp-path=/var/lib/nginx/tmp/client_body --http-proxy-temp-path=/var/lib/nginx/tmp/proxy --http-fastcgi-temp-path=/var/lib/nginx/tmp/fastcgi --http-uwsgi-temp-path=/var/lib/nginx/tmp/uwsgi --http-scgi-temp-path=/var/lib/nginx/tmp/scgi --pid-path=/run/nginx.pid --lock-path=/run/lock/subsys/nginx --user=nginx --group=nginx --with-file-aio --with-ipv6 --with-http_auth_request_module --with-http_ssl_module --with-http_v2_module --with-http_realip_module --with-http_addition_module --with-http_xslt_module=dynamic --with-http_image_filter_module=dynamic --with-http_geoip_module=dynamic --with-http_sub_module --with-http_dav_module --with-http_flv_module --with-http_mp4_module --with-http_gunzip_module --with-http_gzip_static_module --with-http_random_index_module --with-http_secure_link_module --with-http_degradation_module --with-http_slice_module --with-http_stub_status_module --with-http_perl_module=dynamic --with-mail=dynamic --with-mail_ssl_module --with-pcre --with-pcre-jit --with-stream=dynamic --with-stream_ssl_module --with-google_perftools_module --with-debug --with-cc-opt='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic' --with-ld-opt='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,-E'
Tjek Nginx Configuration Syntax
Før du faktisk starter Nginx-tjenesten, kan du kontrollere, om dens konfigurationssyntaks er korrekt. Dette er især nyttigt, hvis du har foretaget ændringer eller tilføjet en ny konfiguration til den eksisterende konfigurationsstruktur.
For at teste Nginx-konfigurationen skal du køre følgende kommando.
$ sudo nginx -t nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful
Du kan teste Nginx-konfigurationen, dumpe den og afslutte ved hjælp af -T
flag som vist.
$ sudo nginx -T
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful # configuration file /etc/nginx/nginx.conf: # For more information on configuration, see: # * Official English Documentation: http://nginx.org/en/docs/ # * Official Russian Documentation: http://nginx.org/ru/docs/ user nginx; worker_processes auto; error_log /var/log/nginx/error.log; pid /run/nginx.pid; # Load dynamic modules. See /usr/share/nginx/README.dynamic. include /usr/share/nginx/modules/*.conf; events { worker_connections 1024; } http { log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; include /etc/nginx/mime.types; default_type application/octet-stream; # Load modular configuration files from the /etc/nginx/conf.d directory. # See http://nginx.org/en/docs/ngx_core_module.html#include # for more information. include /etc/nginx/conf.d/*.conf; server { listen 80 default_server; listen [::]:80 default_server; server_name _; root /usr/share/nginx/html; # Load configuration files for the default server block. include /etc/nginx/default.d/*.conf; location / { } error_page 404 /404.html; location = /40x.html { } error_page 500 502 503 504 /50x.html; location = /50x.html { } } ....
Start Nginx Service
For at starte Nginx-tjenesten skal du køre følgende kommando. Bemærk, at denne proces muligvis mislykkes, hvis konfigurationssyntaks ikke er OK.
$ sudo systemctl start nginx #systemd OR $ sudo service nginx start #sysvinit
Aktivér Nginx Service
Den forrige kommando starter kun tjenesten i mellemtiden, for at aktivere den automatisk start ved opstartstid skal du køre følgende kommando.
$ sudo systemctl enable nginx #systemd OR $ sudo service nginx enable #sysv init
Genstart Nginx Service
For at genstarte Nginx-tjenesten, en handling, der stopper og derefter starter tjenesten.
$ sudo systemctl restart nginx #systemd OR $ sudo service nginx restart #sysv init
Se Nginx servicestatus
Du kan kontrollere Nginx-tjenestens status som følger. Denne kommando viser statusoplysninger om kørselstid om tjenesten.
$ sudo systemctl status nginx #systemd OR $ sudo service nginx status #sysvinit
Created symlink from /etc/systemd/system/multi-user.target.wants/nginx.service to /usr/lib/systemd/system/nginx.service. systemctl status nginx ● nginx.service - The nginx HTTP and reverse proxy server Loaded: loaded (/usr/lib/systemd/system/nginx.service; enabled; vendor preset: disabled) Active: active (running) since Tue 2019-03-05 05:27:15 EST; 2min 59s ago Main PID: 31515 (nginx) CGroup: /system.slice/nginx.service ├─31515 nginx: master process /usr/sbin/nginx └─31516 nginx: worker process Mar 05 05:27:15 linux-console.net systemd[1]: Starting The nginx HTTP and reverse proxy server... Mar 05 05:27:15 linux-console.net nginx[31509]: nginx: the configuration file /etc/nginx/nginx.conf syntax is ok Mar 05 05:27:15 linux-console.net nginx[31509]: nginx: configuration file /etc/nginx/nginx.conf test is successful Mar 05 05:27:15 linux-console.net systemd[1]: Failed to read PID from file /run/nginx.pid: Invalid argument Mar 05 05:27:15 linux-console.net systemd[1]: Started The nginx HTTP and reverse proxy server.
Genindlæs Nginx-tjenesten
Brug følgende kommando for at bede Nginx om at genindlæse sin konfiguration.
$ sudo systemctl reload nginx #systemd OR $ sudo service nginx reload #sysvinit
Stop Nginx Service
Hvis du vil stoppe Nginx-tjenesten af en eller anden grund, skal du bruge følgende kommando.
$ sudo systemctl stop nginx #systemd OR $ sudo service nginx stop #sysvinit
Vis Nginx Command Help
Brug følgende kommando for at få en nem referencevejledning til alle Nginx-kommandoer og indstillinger.
$ systemctl -h nginx
systemctl [OPTIONS...] {COMMAND} ... Query or send control commands to the systemd manager. -h --help Show this help --version Show package version --system Connect to system manager -H --host=[[email ]HOST Operate on remote host -M --machine=CONTAINER Operate on local container -t --type=TYPE List units of a particular type --state=STATE List units with particular LOAD or SUB or ACTIVE state -p --property=NAME Show only properties by this name -a --all Show all loaded units/properties, including dead/empty ones. To list all units installed on the system, use the 'list-unit-files' command instead. -l --full Don't ellipsize unit names on output -r --recursive Show unit list of host and local containers --reverse Show reverse dependencies with 'list-dependencies' --job-mode=MODE Specify how to deal with already queued jobs, when queueing a new job --show-types When showing sockets, explicitly show their type -i --ignore-inhibitors ...
Du vil muligvis også gerne læse disse følgende Nginx-relaterede artikler.
- Den ultimative guide til sikring, hærdning og forbedring af Nginx-webserverens ydeevne
- Amplify - NGINX Monitoring Made Easy
- ngxtop - Overvåg Nginx-logfiler i realtid i Linux
- Sådan installeres Nginx med virtuelle værter og SSL-certifikat
- Sådan skjules Nginx-serverversion i Linux
Det er alt for nu! I denne vejledning har vi forklaret nogle af de mest anvendte Nginx-servicestyringskommandoer, som du bør kende, herunder start, aktivering, genstart og stop af Nginx. Hvis du har tilføjelser eller spørgsmål at stille, så brug feedbackformularen nedenfor.